제품 정보로 건너뛰기
1 의 9

Intulon

Intulon 3-Point Leveling Table for Resin, Epoxy & Silicone Mold Casting – 10 in Round Board, Tool-Free Thumb Knobs, Two-Way Bubble Level

Intulon 3-Point Leveling Table for Resin, Epoxy & Silicone Mold Casting – 10 in Round Board, Tool-Free Thumb Knobs, Two-Way Bubble Level

정가 ₩47,500 KRW
정가 할인가 ₩47,500 KRW
할인 품절
관세 및 세금이 포함된 가격입니다.
수량

SKU(재고 관리 코드):TBL-10-BK

주문 시 Global-e의 이용 약관 및 개인정보처리방침에 따라 기록상 판매자(MOR)인 Global-e로부터 구매하며, Intulon과(와) 정보를 공유하는 데 동의하게 됩니다.

A leveling table that actually gets level.

We designed this table after a four-leg resin board let us down. One leg always floated, the feet needed a wrench, and the bubble never told us much. So we built the table we wanted, and we have used it in our own shop ever since to cast silicone seals.

Why three feet

Three points always sit flat. Set this table on any bench and all three feet touch. Nothing rocks, so each knob does one job: it raises or lowers its corner.

How to level it

  1. Thread the three leveling feet into the base by hand. They ship loose to protect the box.
  2. Set the table on your bench and rest the bubble level on the board.
  3. Turn the thumb knobs until both bubbles sit between the lines.
  4. Place your molds on the board and pour.

The level also seats on the center hub, so you can level the base before the board goes on.

What it is for

  • Epoxy and UV resin: coasters, jewelry and small castings
  • Silicone mold making
  • Candle and wax pouring
  • Any small pour that has to cure flat

In the box

  • Leveling base, assembled
  • Three leveling feet with thumb knobs
  • 10 in round poplar plywood board
  • Two-way bubble level

Specifications

  • Footprint: 11.3 × 10 in (288 × 254 mm)
  • Height: 2 in (50 mm)
  • Board: poplar plywood, 10 in (254 mm) across, 2.5 mm thick
  • Base and knobs: PETG plastic
  • Adjustment: 1 in at each foot
  • Capacity: up to 12 lb (5.5 kg)
  • Made in the USA

Good to know

This table is leveled by hand. It is not self-leveling.

전체 세부 정보 보기