1
/
の
9
Intulon
Intulon 3-Point Leveling Table for Resin, Epoxy & Silicone Mold Casting – 10 in Round Board, Tool-Free Thumb Knobs, Two-Way Bubble Level
Intulon 3-Point Leveling Table for Resin, Epoxy & Silicone Mold Casting – 10 in Round Board, Tool-Free Thumb Knobs, Two-Way Bubble Level
通常価格
¥5,500 JPY
通常価格
セール価格
¥5,500 JPY
関税と税金が含まれます。
数量
SKU:TBL-10-BK
受取状況を読み込めませんでした
A leveling table that actually gets level.
We designed this table after a four-leg resin board let us down. One leg always floated, the feet needed a wrench, and the bubble never told us much. So we built the table we wanted, and we have used it in our own shop ever since to cast silicone seals.
Why three feet
Three points always sit flat. Set this table on any bench and all three feet touch. Nothing rocks, so each knob does one job: it raises or lowers its corner.
How to level it
- Thread the three leveling feet into the base by hand. They ship loose to protect the box.
- Set the table on your bench and rest the bubble level on the board.
- Turn the thumb knobs until both bubbles sit between the lines.
- Place your molds on the board and pour.
The level also seats on the center hub, so you can level the base before the board goes on.
What it is for
- Epoxy and UV resin: coasters, jewelry and small castings
- Silicone mold making
- Candle and wax pouring
- Any small pour that has to cure flat
In the box
- Leveling base, assembled
- Three leveling feet with thumb knobs
- 10 in round poplar plywood board
- Two-way bubble level
Specifications
- Footprint: 11.3 × 10 in (288 × 254 mm)
- Height: 2 in (50 mm)
- Board: poplar plywood, 10 in (254 mm) across, 2.5 mm thick
- Base and knobs: PETG plastic
- Adjustment: 1 in at each foot
- Capacity: up to 12 lb (5.5 kg)
- Made in the USA
Good to know
This table is leveled by hand. It is not self-leveling.
共有
