Frequently Asked Questions
Portable A/C Accessories
Almost a decade ago when we invented the portable air conditioner exhaust accessories line of products, we used PLA material which was found to be susceptible to heat deterioration.
We have since switched to PETG and Nylon materials which are heat resistant and not susceptible to heat deterioration when used with portable air conditioners.
Type G, Type J and the like denote products with similar characteristics.
We have several products that solve more or less the same problems. However, they differ in how they function. Products of the same type look similar and are installed in similar fashion.
Factory-fitted adapters must be removed from the tube in order to thread the tube onto Intulon wall mounts.
Yes. The portable A/C exhaust wall mount plugs will screw on to an installed type G vent kit when the tube is not connected.
Type G vent kits can be installed on RVs, campers and houses. In fact, we created the deeper wall thickness variants (over 3 inches) specifically for house installations.
Our other vent kits (for example EW2-D-NET-KIT and 6VENT-NET-KIT) have parts on the outside and inside of the wall that are connected by screws.
Type G vent kits however don't use screws at all. They have a portion of the kit that go through the wall and is secured on the inside by a hand-tightened portion of the kit.
EW2-D-NET-KIT and 6VENT-NET-KIT however mount more flush on the inside whereas Type G products stick out a little (by about an inch) on the inside because of the locking ring assembly.
Type G product can be installed on think walls and walls as thick as 12 inches whereas 6VENT-NET-KIT can only be installed on tents and thin walls not thicker than 0.25 inch.
General
Yes. We can 3D print your custom model file and we can also design the model for you if all you have is an idea.
Please contact sales@intulon.com
Since most of our products are 3D printed, there might be very slight variations between products. However, the product will function as expected.